Five-crown trapezoidal insulated panel for flat roofs
The FALK 1000 TR PD is a insulation panel for flat roofs that provides good insulation and contributes to a good indoor climate in a building. Unlike conventional steeldeck systems, this prefabricated roof panel consists of two steel sheets with a PIR insulation core in between. So a complete flat roof consists of just two layers – this self-supporting sandwich panel with a light-coloured, waterproof EPDM membrane on top.
25m2 can be sealed in a single crane operation
Screws are not visible
Good insulation and airtightness
Installation-friendly delivery to construction site
Available with circular CradleCore® insulation core
Installed in no time
With a maximum length of 25 metres, this five-crown roof panel can be installed very quickly.
We can also deliver the insulated panels to your construction site in such a way that they do not need to be rotated before they can be installed. From core thicknesses above 100mm, the FALK 1000 TR PD is connected using tongue-and-groove joints, which makes it easier to install and improves airtightness.
Sleek finish
The underside of the insulation panel features a sleek trapezoidal profile with a depth of 35mm; the outer side has a shallow box profile. Thanks to the screws with a special washer plate, the insulated panels are easy to install – and you are left with a roof surface that is virtually flat. This makes it very easy to finish your roof with a light-coloured EPDM or PVC membrane.
Span
The span of this insulated flat roof panel depends on several factors. Calculate the span for your project using our FALKULATOR calculation tool.
View in 360°
Configure your panel
Choose the panel width and color
Core thickness [mm]
Total height [mm]
U-value [m²K/W]
Weight [kg/m²]
Fire class
80*
115
0.238
14.9
B-s2,d0 **
100
135
0.193
15.7
B-s2,d0 **
125
160
0.155
16.7
B-s2,d0 **
150*
185
0.132
17.7
B-s2,d0 **
* Available on request
** B-s1,d0 available on request
Working width
1000 mm
Center-to-center distance
200 mm
Profile height
35 mm
Insulation
PIR-insulation (CradleCore® upon request available)
Cutback
Available with cutback (max. 300 mm)
Legrichting
Left-hand and right-hand version available
Coating
Outside: Polyester 25 mu (other coatings upon request)
Inside: Polyester FALK Off-White 25 mu (other coatings upon request)
Is it possible to install solar panels on a flat roof with self-supporting insulation panels?
Yes! Use our FALKULATOR to calculate the exact span of your project. If you need advice on mounting solar panels on insulation panels, get in touch! We would be more than happy to talk you through your options.
What is the advantage of a insulated flat roof panel over a traditional roofing system?
With a FALK insulated flat roof panel, you can seal and insulate 25m2 of roof in a single crane operation. Simply apply a light-coloured EPDM or PVC membrane and you have a wind and watertight flat roof. A traditional roofing system often consists of four or more layers.
What colours are available for the interior skin of my insulated flat roof panels?
"The standard interior coating for insulation flat roof panels is FALK Off-White. As the panels are manufactured at FALK, you can choose from a wide range of coatings and colours. A popular alternative to FALK Off-White is FALK Reflective White, a reflective traffic white coating that helps save energy. This coating reflects up to 85% of light, so light can be used intelligently in the building: fewer light sources are needed than with a normal coating, which reduces energy costs and cuts down on carbon emissions. Find out more about FALK Reflective White here.
For a more industrial look, you can also go for a darker coating. For example, a FALK Black Matt coating was chosen for this shed. This gives the building a completely different character.
All coatings and colours are therefore available on request. Get in touch to find out about the possibilities!"
United Kingdom
Français
Nederland
Ireland
US
Deutschland
Canada